Everspin Technologies (NASDAQ: NASDAQ:MRAM) has announced its financial outcomes for the first quarter of 2024, with revenue reaching $14.4 million and a gross margin of 56.5%. Despite forecasting a flat product revenue for the second quarter, the company is optimistic about a revenue increase in the latter half of the year due to design wins in Toggle and STT-MRAM. The company's cash balance stands at $34.8 million and is hopeful about receiving funding from the CHIPS and Science Act. Notably, IBM (NYSE:IBM) has selected Everspin's PERSYST 1-gigabit STT-MRAM solution for their FlashCore Module.
Key Takeaways
- Everspin reports Q1 2024 revenue of $14.4 million with a gross margin of 56.5%.
- Cash balance reported at $34.8 million.
- Anticipates flat product revenue in Q2, mainly due to weakness in Asia Pacific region.
- Expects revenue ramp in H2 2024 from Toggle and STT-MRAM design wins.
- Optimistic about funding from CHIPS and Science Act.
- IBM selects Everspin's STT-MRAM solution for its FlashCore Module.
- Q2 guidance misses estimates by $3 million, primarily from a decline in RAD-Hard revenue.
- Company confident in H2 2024 performance with increased bookings and new design wins.
Company Outlook
- Everspin expects a slower start to the year but is confident in scaling the business.
- Anticipates a ramp in design wins in H2 2024, likely leading to an uptick in revenue.
- Lead times have normalized to around 26 to 27 weeks, indicating a stabilization in supply chain.
Bearish Highlights
- Q2 product revenue expected to be flat due to weakness in Asia Pacific region and end markets.
- RAD-Hard revenue not included in Q2 guidance as no contracts have been signed.
- Challenges remain in the industrial and automotive sectors.
Bullish Highlights
- Increased bookings for STT data center and new design wins projected to boost second half performance.
- Licensing projects expected to be signed in H2 2024.
- New foundry agreement to improve fab utilization and cost distribution.
- Healthy backlog for 2024, thanks to the partnership with IBM.
Misses
- Q2 guidance misses analysts' revenue estimates by $3 million.
- No signed contracts yet for RAD-Hard revenue, leading to exclusion from Q2 guidance.
Q&A Highlights
- Company expects OpEx to be flat to down in the future through spending reduction.
- Gross margins expected in the low to mid-50% range, with improvements from new low-density STT product.
- No declines in ASP observed, but lower volumes due to market softness in Asia Pacific and Japan.
Everspin Technologies remains focused on overcoming early-year challenges and leveraging its design wins to scale up revenue in the second half of 2024. With a stable cash position and strategic partnerships, the company is poised to navigate the semiconductor industry's cyclical nature and capitalize on emerging opportunities.
InvestingPro Insights
Everspin Technologies (NASDAQ: MRAM), a prominent player in the semiconductor industry, has reported a solid financial standing in its recent earnings. InvestingPro data highlights a market capitalization of $160.15 million, with a P/E ratio of 21.42 based on the last twelve months as of Q4 2023. This suggests that the company is trading at a valuation that factors in its earnings potential, which is further supported by a PEG ratio of 0.4, indicating that the stock may be undervalued relative to its earnings growth.
Notably, the company's gross profit margin stands at a robust 58.41%, showcasing its ability to maintain profitability despite the competitive landscape. This aligns with the InvestingPro Tips that highlight MRAM's financial health, including the fact that it holds more cash than debt and has liquid assets exceeding short-term obligations. These factors are crucial for investors considering the company's ability to sustain operations and invest in growth opportunities.
Moreover, Everspin's revenue growth over the last twelve months was 6.3%, a sign of steady progress. Analysts predict the company will be profitable this year, which is corroborated by the fact that it has been profitable over the last twelve months. This profitability, coupled with the company's strategic moves, such as the partnership with IBM, positions it well for potential future growth.
For investors seeking more in-depth analysis and additional insights, there are 6 more InvestingPro Tips available, which can be accessed through the InvestingPro platform. By using the coupon code PRONEWS24, readers can get an additional 10% off a yearly or biyearly Pro and Pro+ subscription, providing access to valuable investment tools and data to inform their decisions.
Everspin's emphasis on its design wins and partnerships, such as the one with IBM, indicates a forward-looking strategy aimed at capitalizing on the growing demand for advanced memory solutions. With a strong gross margin and a positive outlook from analysts, MRAM appears to be navigating the semiconductor industry's challenges with resilience and strategic acumen.
Full transcript - Everspin Technologies Inc (MRAM) Q1 2024:
Operator: Good day and thank you for standing by. Welcome to the Conference Call to discuss Everspin Technologies First Quarter 2024 Financial Results. At this time, all participants are in a listen-only-mode. At the conclusion of today's conference call, instructions will be provided for question and answer. As a reminder, this conference is being recorded. I would now like to turn the conference over to Cassidy Fuller [ph] Investor Relations of Everspin. Please begin.
Unidentified Company Representative: Thank you, operator and good afternoon everyone. Everspin released results for the first quarter 2024, ended March 31, 2024, this afternoon after the market closed. I'm Cassidy Fuller, Investor Relations for Everspin, and with me on today's call are Sanjeev Aggarwal, President and Chief Executive Officer, and Anuj Aggarwal, Chief Financial Officer. Before we begin the call, I would like to remind you that this conference call contains forward-looking statements regarding future events, including, but not limited to, the company's expectations for Everspin's future business, financial performance and goals, customer and industry adoption of MRAM technology, successfully bringing to market and manufacturing products in Everspin's design pipeline, and executing on its business plan. These forward-looking statements are based on estimates, judgments, current trends and market conditions, and involve risks and uncertainties that may cause actual results to differ materially from those contained in the forward-looking statements. We would encourage you to review the Company's SEC filings, including the annual report on Form 10-K and other SEC filings made from time to time in which the Company may discuss risk factors associated with investing in Everspin. All forward-looking statements are made as of the date of this call and, except as required by law, the Company undertakes no obligation to update or alter any forward-looking statements made on this call, whether as a result of new information, future events, or otherwise. Financial results discussed today reflect the Company's preliminary estimates and are based on the information available as of the date hereof and are subject to further review by Everspin and its external auditors. The Company's actual results may differ materially from these estimates as a result of the completion of financial closing procedures, final adjustments, and other developments arising between now and the time that the financial results for this period are finalized. Additionally, the Company's press release and statements made during this conference call will include discussions of certain measures and financial information in GAAP and non-GAAP terms. Included in the Company's press release are definitions and reconciliations of GAAP net income to adjusted EBITDA, which provide additional details. A copy of the press release is posted on the Investor Relations section of Everspin's website at www.everspin.com. And now I'd like to turn the call over to Everspin's President and CEO, Sanjeev Aggarwal. Sanjeev, please go ahead.
Sanjeev Aggarwal: Thank you Cassidy and thanks everyone for joining us on the call today. During the first quarter, we delivered revenue of $14.4 million at the high end of our guidance range of $13.5 million to $14.5 million. We delivered gross margin of 56.5% in the first quarter compared to 56.8% in Q1 2023. We ended the year with a cash balance of $34.8 million. We are pleased by the progress we have made over the past few years with our Toggle MRAM solution and as we continue to ramp up our lower density products, we will have increased visibility for our STT-MRAM solutions. Looking ahead, we expect to see flattish product revenue in the second quarter compared to Q1 due to continued weakness in Asia Pacific and in industrial, consumer and auto end markets. However, we expect a ramp in our Toggle and STT-MRAM design wins in the second half of 2024. Our PERSYST industrial STT-MRAM product line has demonstrated consistent strength as it has continued to gain momentum in terms of design wins. We continue to expect to begin translating these design wins into revenue starting in the second half of 2024. Turning now to our radiation hard programs that we outlined last quarter. As we noted on our previous calls, we are engaged in two radiation hard programs using our STT-MRAM technology, the first related to an adhoc 64-megabit STT-MRAM project and the second aimed at building a strategic radiation hardened FPGA. We expect to continue recognizing revenue from the 64-megabit STT-MRAM project over the coming quarters. We successfully executed the deliverables for the strategic radiation hardened FPGA project in Q1. We expect this project to continue in 2024, with additional funding from the sponsors in the coming months and quarters. During the quarter, we also signed an extension of a Toggle MRAM reliability project for radiation hard applications that we originally executed in the third quarter of 2023. As you may have seen, we recently announced that IBM selected our PERSYST 1-gigabit STT-MRAM solution for use in their new FlashCore Module, the FCM4. This DDR4, like high performance persistent memory, ensures critical data integrity even during power loss. This reinforces deployment of STT-MRAM in data center storage applications. Lastly, we recently submitted our application for the CHIPS and Science Act. While we do not know the exact timing for a decision, we remain optimistic that we will receive funding which we plan to use for additional 200 millimeter Toggle and STT-MRAM capacity and improved capabilities. There are other grant [ph] opportunities that we are pursuing and hope to be able to share additional details as we move through the year. Turning to our outlook for 2024, as we mentioned last quarter, we expect the year to be weighted more heavily towards the second half as we continue to experience a slower start to the year. This slower start can be attributed to continued economic weakness in Asia Pacific, as well as higher interest rates which have driven customers to focus on lean inventory practices along with shifting project schedules for some government contracts. Despite these near term challenges, we expect to bring in recognizing revenue from our new STT-MRAM ramp design wins, a stabilization in customer and distributor inventory and a gradual improvement in the Asia Pacific region. Moreover, we are encouraged by our recent traction. We attended Embedded World in Nuremberg a few weeks ago where we introduced the PERSYST brand and had a full schedule of meetings with existing and potential distributors and customers. We came away from the show with significantly more leads than at last year's event. I will now turn it over to our CFO, Anuj Aggarwal who will take you through our first quarter financials and second quarter 2024 guidance. Anuj?
Anuj Aggarwal: Thank you, Sanjeev and good afternoon everyone. We delivered solid quarterly results near the high end of our guidance range of $13.5 million to $14.5 million with revenue of $14.4 million compared to $14.8 million in the first quarter of 2023. MRAM product sales in the first quarter, which includes both Toggle and STT-MRAM revenue was $10.9 million compared to $13.8 million in Q1 2023. Licensing, royalty, patent and other revenue in the first quarter increased to $3.6 million compared to $1.1 million in Q1 2023. Shipments to suppliers for our high density STT product for data center applications represented 20% of revenue in the first quarter versus 11% of revenue in Q1 2023. Turning to gross margin, our GAAP gross margin was relatively flat to Q1 2023 at 56.5%. GAAP operating expenses for the first quarter of 2024 were $8.8 million compared to $7.7 million in the first quarter 2023. This drove our first quarter results to a small loss of $0.2 million or a loss of $0.01 per diluted share based on $21.3 million weighted average fully diluted shares outstanding. This compares to net income of $0.8 million or $0.04 per diluted share in the first quarter of 2023. Adjusted EBITDA was $1.9 million compared to $2.3 million in Q1 2023. Our balance sheet remains strong and debt free. We ended the quarter with cash and cash equivalents of $34.8 million, down from $36.9 million at the end of the prior quarter. The decrease in cash quarter-over-quarter is attributed to investments in equipment for new products and operating facilities to ensure readiness for the anticipated second half ramp. Cash flow used in operations was $1.3 million for the first quarter. Turning to guidance, we mentioned on our last quarter's call that we anticipate revenue for the first half of 2024 to be lower than our typical seasonality. This has proven true for our first quarter and we expect our second quarter to be down from the first quarter, reflecting flattish Toggle revenue and lower RAD-Hard revenue that Sanjeev mentioned in his remarks. Taking these factors into consideration, we expect Q2 total revenue in the range of $10 million to $11 million and GAAP net loss per diluted share to be between negative $0.14 and negative $0.09. We are optimistic for the second half of 2024 as we begin to recognize revenue from our design wins for our STT-MRAM products. In summary, we remain confident in our ability to scale the business and convert design wins to revenue. We have already observed increased traction with our design wins and are seeing particular strength from industrial and aerospace end markets. As the industry navigates some near term challenges, we remain focused on growing our Toggle, MRAM and DRAM products and recognizing revenue for our STT-MRAM technology. Operator, you may now open the line for questions.
Operator: Thank you. [Operator Instructions] One moment for our first question, please. Our first question will come from the line of Quinn Bolton with Needham. Your line is now open.
Unidentified Analyst: Hey, guys, Nick Doyle on for Quinn. Thanks for taking our questions. A couple housekeeping ones first. For the first quarter, product revenue was down as expected. But did the high density STT, did that increase quarter-over-quarter?
Anuj Aggarwal: Hi, Nick. This is Anuj. Great question. So from a product perspective, yeah, we did see some softness in Toggle as we've had some challenges with industrial. But from an STT data center perspective, that product has been pretty healthy. So it was up in Q4 and it was pretty healthy in Q1 as well.
Unidentified Analyst: Great. And then for OpEx, I mean, what drove the sharp increase this quarter? And do you expect to maintain this higher level? I don't remember if that's related to NRES [ph] and not having them this quarter. Just how are you thinking about OpEx?
Anuj Aggarwal: Yeah, sure. So from an OpEx standpoint, there's a couple of things. We had some higher professional services, some stock based compensation and depreciation. I think without giving guidance looking forward, we expect OpEx to be relatively flat to down. So the team's working on reducing spending and making sure we can have that decline.
Unidentified Analyst: Okay. And then for the 2Q guide, I mean, the guide missed our estimate by about $3 million. Can you just speak to what drove the miss? I mean, reading through the lines, it just seems like Toggles is just a little bit worse. So that products are expected to decline next quarter. And you mentioned RAD-Hard's going down before it goes up. So in that same vein, margins should probably decline as licensing goes down as well. Just any more color on the guide? Thanks.
Anuj Aggarwal: Yeah, no, I think you're hitting it as well. I think from a Q2 guidance perspective, if I take a step back, from a product revenue perspective, we expect things to be relatively flat. So as you mentioned, Toggle is flat to slightly down. STT data center, that's going pretty healthy. And we expect it to be relatively flat. But then from a RAD-Hard perspective, as you might recall from some of the previous calls, we've been able to close and complete out several RAD-Hard projects. And we're currently in the works on a couple of additional new RAD-Hard projects. So the guide you're seeing today doesn't include any RAD-Hard revenue since we haven't signed anything yet. And so really, the decline there is, you're seeing the RAD-Hard revenue not being incorporated into Q2.
Unidentified Analyst: Okay. And then last question. I'll jump back in. Just what gives you confidence on the second half ramp? Maybe how much maybe you can give percent or absolute dollar range. How much of the growth in the back half is coming from the RAD-Hard? Thanks.
Anuj Aggarwal: Yes, I want to be careful because we don't necessarily give guidance for the full year, but I will say we're seeing the same macroeconomic challenges everyone else is. So talking about things before the working capital, we continue to see there's some pressure there from Dystee's [ph] as they're reducing inventory. From a Japan, China perspective, the yen versus dollar impact, and seeing that products are a little bit more costly, right. Because the yen is depreciated and then we're seeing ordering kind of going back to the lead times. So from a macro perspective, I think that's still true. I think what I would say as we deep dive into our business, there's a couple of things that give us some confidence in the second half. So if we look at the STT data center, for example, the bookings that we see so far in 2024 look to exceed 2023, and our new STT low density product, that's also ramping, and we're continuing to see design wins. In addition to that, from a licensing perspective, there's several projects that are being worked. They haven't been signed yet, but there's multiple things in the hopper. So we expect to sign a few of those in the second half of the year. So that's what gives us confidence as we look to the full year.
Unidentified Analyst: Thanks.
Operator: Thank you. One moment for our next question, please. Our next question comes from the line of Richard Shannon from Craig-Hallum Capital. Your line is now open.
Richard Shannon: Well, hi, guys. Thanks for taking my questions. Maybe follow up on the topic here of RAD-Hard. Seems like a particular project here seems to be the reason for the sequential decline here, as your products seem to be kind of mostly flat sequentially. Is there like a pause in the project here or is there questions as to whether it will continue? Because I think your partners talked about a program assuming all the options are picked up to something that lasts on the order of four years, and we've got at least two years left to go. So just want to get some sense of the visibility in that project and whether this is just a lull between kind of sub programs within the bigger picture?
Sanjeev Aggarwal: Yeah. Hi, Richard, this is Sanjeev. Thanks for your question. Yeah, you're right. I think we expect the project that we are working on, the strategic radiation hardened FPGA project with our partner, we expect that to get renewed sometime in the next coming months and quarter. The reason for the delay is that there has been some delay from the US government funding agency in continuing the project because of some changes in the schedule on their side. The project is like we said, we met all our deliverables in Q1, so we fully expect to get that project going sometime in Q2 or as soon as the funding comes through. Also, Richard, I would like to point out that we did talk about a new Toggle MRAM reliability project that we assigned in Q2. We just don't have all the details yet, so we haven't included that in our guidance for Q2 as well.
Richard Shannon: Well, I guess I'll follow up on that last part of your comments, Sanjeev, sounds very interesting. How do we think about this in the scale of the other Toggle reliability project? And what's the source [ph] there is another US or other government agency or what's the source of that one?
Sanjeev Aggarwal: So that's basically a follow up from the same agency that we did a project with them in 2023. They had some follow up questions on the reliability models that we shared. So we are actually collecting some more data to bring them up to speed on that one. So in terms of scale, it won't be as big as it was in '23, but we don't have the financial figures yet to disclose.
Richard Shannon: Okay, fair enough. Let me hit a couple of financial questions for Anuj. Let's see. Let's hit on product gross margins here. After some pretty good numbers last year, last two quarters have been fairly significant, amount lower, I think in the high 40s percent range here. Last quarter you talked about it being something related to yield. I'm wondering if that's still continuing. There's any visibility in getting that back up to prior levels. And then also, is there any dynamic of mix here, particularly as there seems to be a little bit of shift between Toggle and STT in your mix over the last few quarters?
Anuj Aggarwal: Yeah. Hi, Richard. Great question. Yeah, from a gross margin perspective, the gross margin, again without giving guidance, has been within our internal model. So, you know, we continue to hold with the low to mid 50s as where we believe gross margin is. If you look at Q1 versus guidance, which I think you're kind of alluding to, the Q1 gross margin was pretty healthy. We did have about $3.3 million in RAD-Hard revenue that, that we saw in Q1. And so that's normally higher margins, somewhere between 70% to 90% gross margin. In Q2, like we mentioned, there's no RAD-Hard revenue that's being incorporated into the guide. So really the range there is based on purely product margin. But from a product margin perspective, the team has done a great job operationally looking at cost reduction projects, being operationally efficient. So we've been able to see a healthy gross margin last couple of quarters.
Richard Shannon: Okay. Maybe to follow up on this topic, and I guess I'm very curious, specifically on product gross margins here, should we be viewing these levels that we've seen a number of quarters over the past? Looking at the model over the last three years, where you've seen numbers in the kind of mid 50s range, is that deemed to be abnormally high or the range you aspire to. And then to what degree do we see - as STT ramps up here, both the high density one and the new low density one that seems to be ramping the second half? Is that a level that we can still aspire to, or is that going to be a little bit more difficult?
Anuj Aggarwal: I think what we've seen in the past, Richard, is probably a little bit on the high end. There's been, I think, some great efficiencies as the teams looked at improving yields and bringing performance up from an operational standpoint. So I think there's some steady state that you'll see there. It's not like you can get yields to 100%, right. So there's going to be some steady state where that kind of tapers off. There is a little bit of flex in terms of the mix. And so, as we look at that, there's some challenges there. But if you look at the new low density STT product, we're expecting margins to improve from that product. Right now, it's just been introduced, and so we're working through the margin challenges there as you ramp a new product and get it up to speed and get yields to the levels you need to get them to. But you should see improvement in the gross margin from that product.
Richard Shannon: Okay. Fair enough...
Anuj Aggarwal: Our aspiration is still to be the mid 50S.
Richard Shannon: Okay. But that's the number you've talked about in terms of your total gross margins, not product gross margins, correct?
Anuj Aggarwal: That's correct.
Sanjeev Aggarwal: That's right.
Richard Shannon: Okay. Okay. Fair enough. Then maybe one or two others here. You know, I think you said in your press release here something about a foundry agreement here, and I'm not sure if I caught anything in your prepared remarks around that. Can you elaborate what that is?
Anuj Aggarwal: Yeah. So, as you know, we've actually been a foundry for several radiation hard programs, and also in the past to an embedded program as well, over the last 15 years or so. So we are, you know, actively acting as a foundry. So this is a new customer that we are bringing online. So right now, we are in the process of setting up their wafers in our fab, and we hope to go into low volume production sometime in the second half of this year, more likely Q4 of this year. And the whole idea over here, Richard, is that it's going to lower our, you know, it's going to improve our fab utilization and then lower our - basically distribute our fixed costs over more product.
Richard Shannon: Okay. Can you elaborate on the product here? Is this a custom product in any way, any sense of application? And how big can this customer be relative to your other big customers or your company in total scale?
Anuj Aggarwal: Hopefully we can talk about this more at the next earnings call, Richard, but this is as much as we can disclose at this point.
Richard Shannon: Okay, that's fair enough. Then maybe just kind of looking big picture at your product business here, your guidance here for product revenues being roughly flat is a good sign in the context of what seems like a fairly difficult market for industrial and automotive. To what degree do you think we are - are we through any sort of inventory burn issues? We've seen a little bit of burn, I imagine, in the last few quarters. As you look at it. Are we largely through that, or do you worry that there's going to be more to come?
Sanjeev Aggarwal: Yes, Richard, it's really hard to speculate on where the year is going to be. I think if I think about semiconductor and just being in semiconductor for a long time, typical downturns, you usually see them to be four to five quarters, and from that, we should see some uptick in the second half.
Richard Shannon: Okay, fair enough. The last question, I'll jump on. Sorry, I just didn't mean to interrupt.
Sanjeev Aggarwal: No, no, go ahead.
Anuj Aggarwal: Go ahead, Richard.
Richard Shannon: Last quick question for me is just on lead times, I think you mentioned companies now ordering inside lead time. Are we at lead times that you were at before COVID on both your Toggle and STT products, or is that still coming down to those levels?
Sanjeev Aggarwal: So, Richard, we've kept the lead times back to the pre-pandemic levels. They're roughly 26 to 27 weeks, depending on which products you're looking at.
Richard Shannon: Okay, then I think that's all the questions for me. I'll jump out of line, guys. Thank you.
Sanjeev Aggarwal: Thank you.
Anuj Aggarwal: Thank you, Richard.
Operator: Thank you. [Operator Instructions] And our next question. One moment, please, comes from the line of Quinn Bolton with Needham. Your line is now open.
Quinn Bolton: Hey, guys. Just asking if the product - the product declined this quarter. And just assuming it's flat next quarter, is that - was the decline entirely unit based or is there any ASP, any ASP changes there? And then I would just assume both are flat for the next quarter.
Sanjeev Aggarwal: Yeah, Nick, this is Sanjeev. We have not seen any ASP decline. It's mostly the demand of the softness in the Asia Pacific market and the Japan market, which is causing the lower volumes.
Quinn Bolton: Okay, makes sense. And then for the PERSYST with IBM, could you, I mean, I know it's early, but could you size that opportunity or give us any hints in terms of timing.
Sanjeev Aggarwal: So you might have seen the press release from us as well as IBM. They actually did launch their FCM4 already. So it's available in the marketplace today. And in terms of our backlog, like Anuj mentioned, it's actually pretty healthy for 2024. It's up and to the right compared to 2023, which is what we like to see. And I think basically consistent with the data center market, the increase in our backlog is reflective of that.
Quinn Bolton: Great. Thank you.
Sanjeev Aggarwal: Sure.
Operator: Thank you. I am currently showing no further questions at this time. I'd like to hand the conference back to Sanjeev Aggarwal for closing remarks.
Sanjeev Aggarwal: I would like to say thank you everyone for joining the call today. And we look forward to speaking to you at our next quarter earnings report. Thank you again for joining.
Operator: This concludes today's conference call. Thank you for your participation. You may now disconnect. Everyone, have a wonderful day.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.